All posts tagged: E31

BMW Door Handle Gasket Seal Replacement E31, E32, E34, E36

Published by

The rubber door handle gaskets on the E31 8 series, E32 7 series, E34 5 series and E36 3 series cars will all fail in time. The original BMW gasket dries up in the sun from UV exposure over the years causing cracking and crumbling. Unfortunately BMW does not sell the gaskets separately, so you must purchase the entire door handle if going with the genuine replacement. This can add up to several hundred dollars for a sedan. Instead, quality aftermarket gasket kits are what most people use, coming in at around $29 USD for a set of four gaskets. You can buy a set here. How to Remove the Door Handle Cover Plate and Gasket Open the door and look at the jam on the edge of the door With a nylon pry tool, remove the plastic cap covering the access hole. Avoid using a metal object for this step as it can damage your paint. Spray lubricant such as WD40 onto the sliding brass mechanism and allow to sit for a few minutes. …

How to Do The BMW Trouble Code Stomp Test for E30, E31, E32, E34, E36 Cars

Published by

You may have heard about the “Stomp Test” that can tell you what trouble codes are stored in your vintage BMW’s engine computer. Unlike modern OBD II cars (from 1995 onward) that use a scan tool plugged into the OBD II port, older cars system is classified as OBD I. Some cars have this OBD I diagnostic port under the hood which can allow for a tool to scan for codes. Fortunately for classic BMW drivers in the US, there is the Stomp Test. This works on cars with Bosch Motronic 1.3 or later, which is in model year 1988 cars and up. If you have a 1987 model year BMW, it may be on the cusp, so it depends on what ECU is in the car and its production date. I have been told this test does not work on European or Euro Spec cars, though have not confirmed myself. How To perform the Stomp Test: Turn the ignition to position two. That’s the second click on turning the key. Do not start the …